Toggle navigation
Full Product Range
Batteries
Buzzers Speakers Microphones
Cable Assemblies
Card Readers, Smart Card Connectors, RFiD & NFC and Secure devices
Connectors - Audio, DC
Connectors - Data Connectors
Fans
Filters EMI - EMC
Heat-shrink Tubing and Accessories
Heatsinks, Enclosures & Connectors - Fischer Elektronik
Hinges & Sliders
IEC Connectors
LEDs
OLED Displays
Reflectors & Holders for LED COBs
RJ Connectors
Switches - Anti-vandal
Switches - Miniature & Rotary Encoders
Switches - Tact Slide DIP
Switches - Toggle Rocker Push Button
Trimming Capacitors
Varistors, Thermistors & Capacitors
Product Categories
Heatsinks
Fans
Switches
IEC Connectors and EMC
Data Connectors
Batteries
About Us
Contact Us
Tel: +44 (0)1243 553031
sales@dau-components.com
DESIGN CASE CURVE
DESIGN CASE EUROTAINER
ENCLOSURES
ENCLOSURES
HEAT DISSIPATING CASES FOR LED LINE MODULES
DESIGN CASE SECCO
ACCESSORIES FOR CASES
DESIGN CASE FRAME WITH INTEGRATED HEATSINK
DESIGN CASE SECCO
MINIATURE CASE TONDO
EMBEDDED CASE WITH COOLING FINS
19 INCH PLUG-IN BOXES
Back
|
Home
|
Fischer Elektronik
| Miniature aluminium casing
<
1
>
>
>
>
AKG 33 16 ...
casing tubes made of aluminium sections which are slotted into each other and screwed togetherthe recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nmthe tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate with a thickness of 1.8 mm, lateral in the profile until 1.6 mm designs with fixing straps in the case profiles or cover plates for wall or ceiling mountingwhile using the corresponding case D-Sub connectors can be mounted without front panelsupplied as demounted kit incl. 2 mm cover plates and mounting materialcutouts, special lengths and surface treatments upon request
AKG 33 20 ...
casing tubes made of aluminium sections which are slotted into each other and screwed togetherthe recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nmthe tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate with a thickness of 1.8 mm, lateral in the profile until 1.6 mm designs with fixing straps in the case profiles or cover plates for wall or ceiling mountingwhile using the corresponding case D-Sub connectors can be mounted without front panelsupplied as demounted kit incl. 2 mm cover plates and mounting materialcutouts, special lengths and surface treatments upon request
AKG 33 24 ...
casing tubes made of aluminium sections which are slotted into each other and screwed togetherthe recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nmthe tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate with a thickness of 1.8 mm, lateral in the profile until 1.6 mm designs with fixing straps in the case profiles or cover plates for wall or ceiling mountingwhile using the corresponding case D-Sub connectors can be mounted without front panelsupplied as demounted kit incl. 2 mm cover plates and mounting materialcutouts, special lengths and surface treatments upon request
AKG 41 16 ...
casing tubes made of aluminium sections which are slotted into each other and screwed togetherthe recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nmthe tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate with a thickness of 1.8 mm, lateral in the profile until 1.6 mm designs with fixing straps in the case profiles or cover plates for wall or ceiling mountingwhile using the corresponding case D-Sub connectors can be mounted without front panelsupplied as demounted kit incl. 2 mm cover plates and mounting materialcutouts, special lengths and surface treatments upon request
AKG 41 20 ...
casing tubes made of aluminium sections which are slotted into each other and screwed togetherthe recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nmthe tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate with a thickness of 1.8 mm, lateral in the profile until 1.6 mm designs with fixing straps in the case profiles or cover plates for wall or ceiling mountingwhile using the corresponding case D-Sub connectors can be mounted without front panelsupplied as demounted kit incl. 2 mm cover plates and mounting materialcutouts, special lengths and surface treatments upon request
AKG 41 24 ...
casing tubes made of aluminium sections which are slotted into each other and screwed togetherthe recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nmthe tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate with a thickness of 1.8 mm, lateral in the profile until 1.6 mm designs with fixing straps in the case profiles or cover plates for wall or ceiling mountingwhile using the corresponding case D-Sub connectors can be mounted without front panelsupplied as demounted kit incl. 2 mm cover plates and mounting materialcutouts, special lengths and surface treatments upon request
AKG 55 16 ...
casing tubes made of aluminium sections which are slotted into each other and screwed togetherthe recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nmthe tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate with a thickness of 1.8 mm, lateral in the profile until 1.6 mm designs with fixing straps in the case profiles or cover plates for wall or ceiling mountingwhile using the corresponding case D-Sub connectors can be mounted without front panelsupplied as demounted kit incl. 2 mm cover plates and mounting materialcutouts, special lengths and surface treatments upon request
AKG 55 20 ...
casing tubes made of aluminium sections which are slotted into each other and screwed togetherthe recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nmthe tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate with a thickness of 1.8 mm, lateral in the profile until 1.6 mm designs with fixing straps in the case profiles or cover plates for wall or ceiling mountingwhile using the corresponding case D-Sub connectors can be mounted without front panelsupplied as demounted kit incl. 2 mm cover plates and mounting materialcutouts, special lengths and surface treatments upon request
AKG 55 24 ...
casing tubes made of aluminium sections which are slotted into each other and screwed togetherthe recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nmthe tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate with a thickness of 1.8 mm, lateral in the profile until 1.6 mm designs with fixing straps in the case profiles or cover plates for wall or ceiling mountingwhile using the corresponding case D-Sub connectors can be mounted without front panelsupplied as demounted kit incl. 2 mm cover plates and mounting materialcutouts, special lengths and surface treatments upon request
AKG 55 28 ...
casing tubes made of aluminium sections which are slotted into each other and screwed togetherthe recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nmthe tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate with a thickness of 1.8 mm, lateral in the profile until 1.6 mm designs with fixing straps in the case profiles or cover plates for wall or ceiling mountingwhile using the corresponding case D-Sub connectors can be mounted without front panelsupplied as demounted kit incl. 2 mm cover plates and mounting materialcutouts, special lengths and surface treatments upon request
AKG 55 32 ...
casing tubes made of aluminium sections which are slotted into each other and screwed togetherthe recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nmthe tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate with a thickness of 1.8 mm, lateral in the profile until 1.6 mm designs with fixing straps in the case profiles or cover plates for wall or ceiling mountingwhile using the corresponding case D-Sub connectors can be mounted without front panelsupplied as demounted kit incl. 2 mm cover plates and mounting materialcutouts, special lengths and surface treatments upon request
AKG 55 20 L ...
casing tubes made of aluminium sections which are slotted into each other and screwed togetherthe recommended tightening torque of the screws for mounting the front panels is min. 0.7 Nmthe tubes form a guide groove in the centre for insertion of a printed circuit board or installation plate with a thickness of 1.8 mm, lateral in the profile until 1.6 mm designs with fixing straps in the case profiles or cover plates for wall or ceiling mountingwhile using the corresponding case D-Sub connectors can be mounted without front panelsupplied as demounted kit incl. 2 mm cover plates and mounting materialcutouts, special lengths and surface treatments upon request
For further information, technical support, pricing and lead times please contact -
Sales
DAU Components Telephone
(+44) 01243 553031
SMD Heatsinks on Tape and Reel
TOLA Case Series
New Skived Fin Heatsinks
MY QUOTE REQUEST
You have no requested items.
REQUEST FREE SAMPLES
Heatsinks f.cool
Cases f.case
Connectors f.con
LEDs
Reflectors & Holders for LED COBs
Connectors - Data Connectors
Fans
Catalogues
To cool - heatsink e-book
To protect - cases e-book
To connect - connectors e-book
Thermally conductive material
LED Heatsink catalogue
New Products Catalogue 4.1
General Tolerances to DIN ISO 2768
Video Tour - Fischer Elektronik
OPEN AN ACCOUNT
Request Cross Referencing – QUOTE, DATA & SAMPLES
REQUEST FREE SAMPLES