GAP-Filler, Heat conductive foam and gel foils : GEL G 1
Features
| material: | GEL foil |
| material thickness: | 1±0,200 mm |
| version: | polyamide film mash reinforced, adherent layer on one side |
| colour: | dark gray |
| density: | 2.6 g/cm3 |
| hardness: | 49 Shore 00 |
| thermal conductivity: | 1.5 W/m·K |
| thermal resistance: | 7.56 °C cm2/W |
| thermal resistance (100 kPa): | 1.17 °C in2/W |
| temperature range: | -60°C ... +200°C |
| elongation: | 60 % |
| volume resistance: | 1·106 MΩ/m |
| dielectric constant: | - 5.8 [50 Hz]
- 5.6 [1 KHz]
- 5.5 [1 MHz]
|
| dielectric loss factor: | - 0.048 [50 Hz]
- 0.015 [1 KHz]
- 0.003 [1 MHz]
|
| dielectric strength: | 8 kV/mm (AC) |
| class of inflammability: | UL 94 V-1 |
| type of delivery: | - on both sides covered with protective foil
- plates, usable area 300x200mm
- other dimensions upon request
|
For further information, technical support, pricing and lead times please contact -
Sales
DAU Components Telephone
(+44) 01243 553031
SMD Heatsinks on Tape and Reel
